Pipework and ducting systems in industrial environments can be damaged, stressed and fatigued to the point of catastrophic failure by variations in temperature or pressure, or by mechanical vibrations and movement, unless the effects of those instabilities are neutralized or eliminated at source. The most effective way of achieving this neutralization is to install metal expansion joints at points in the system where such movements and stresses are generated. Metal expansion joints compensate for these movements and stresses and provide the flexibility that the pipe or duct system requires for its safe, long-term operation.
KE-Burgmann Bredan A/S manufacture and supply metal expansion joints as round and rectangular, single, multi-layer, 2 ply testable, with or without flanges, in the following joint types:
- Axial, lateral and angular expansion joints
- Universal expansion joints
- Expansion joints for low pressure and high temperature (exhaust/flue gas)
- Pressure balanced elbow
- In-line pressure balanced and externally pressurized expansion joints
- Camara, single mitre, double mitre and radius corner rectangular expansion joints
- Connectors for heating and ventilation (HVAC)
- PTFE-lined expansion joints
- Clamshell configurations
 |
 |
 |
123 North Orchard St
Suite 1B
Ormond Beach, FL 32174
866-325-8227 toll free
386-673-2293 fax
 |
 |
 |
 |
 |
 |
 |
 |
 |