Rubber expansion joints provide a proven and flexible solution to accommodate many types of movements and requirements of industrial plant and equipment. They are used in all systems transporting fluids, slurries or gases under pressure, at ambient pressure or under vacuum over a wide range of temperatures.
KE-MASTERFLEX® rubber expansion joints are flexible connectors made from natural or synthetic elastomers (Neoprene, EEPDM, Nitrile, Hypalon, Viton, Buthyl) in which special fabrics are embedded to provide physical reinforcement. They are available in two types:
D-Flex types:
A high quality standard rubber expansion joint of spherically moulded design, available in dimensions ranging from DN20 to 750 mm and up to 16 bar working pressure.
DFS-Flex types:
A high quality customised rubber expansion joint as handmade spool arch moulded design, available in dimensions ranging from DN50 mm to 2400 mm, and up to 10 bar working pressure.
Other available configurations include:
- Multiple arch design: two or more arches to accommodate large movements
- Internal sleeve: protection against abrasion
- PTFE lining design: an integral PTFE lining to provide resistance to chemicals
- Tie rods, spherical washers, reinforcing rings etc.: to control expansions caused by pressure
 |
 |
 |
123 North Orchard St
Suite 1B
Ormond Beach, FL 32174
866-325-8227 toll free
386-673-2293 fax
 |
 |
 |
 |
 |
 |
 |
 |
 |